+8613064022215
Personnel engaged in high-altitude operations must undergo regular physical examinations. Those who suffer from severe heart disease， high pressure， poverty， or other unsuitable conditions for high-altitude operations are not allowed to engage in high-altitude operations.
9Loosening occurs， and there are deviations in the geometric shape and fitting dimensions of newly processed and assembled components，In the early stages of use，Mobile cllimbing due to alternating loads such as impact and vibration，JiexiuSelf leveling track scissor fork lifting platformTop 10 Reasons to Choose coupled with rapid wear and tear， it is easy to cause the previously fastened components to become loose.
mQiananAdditionally， treat the corrosive medium of the aluminum alloy lifting platform. Eliminate corrosive media， such as regularly wiping off metal equipment， placing desiccants in precision instruments， and adding a small amount of corrosion inhibitor that can slow down the corrosion rate in corrosive media.
The wear rate is fast， and due to factors such as processing， assembly， and adjustment of new machine components，Mobile cllimbing the friction surface is rough， the contact area of the mating surface is small， and the surface pressure condition is uneven. During the operation of the machine， the concave and convex parts on the surface of the parts are intertwined and rubbed against each other. The metal debris that falls off from the grinding process， in turn， acts as abrasive and continues to participate in friction， further accelerating the wear of the mating surface of the parts. Therefore， during the running-in period， it is easy to cause wear on components (especially the mating surface)， with a fast wear rate. At this point，Mobile cllimbing if overloaded， it may cause damage to the components and lead to early failures.
ENasikWhen safety nets and other protective measures cannot be adopted，JiexiuSelf leveling track scissor fork lifting platformTop 10 Reasons to Choose safety belts must be worn when working at heights above meters; When constructing on steep slopes， it is necessary to pull the safety rope properly. Nowadays， the lifting platform is no longer a special device， it is just a commonly used tool by people. Although it is a tool， we also need to maintain and maintain it.
VyThe monthly maintenance content includes daily maintenance items， checking whether the manual pump can be used normally， and contacting the manufacturer for repair if it cannot be used normally.
The lifting stage can provide real-time information on the operation of the entire vehicle， avoiding relying solely on the experience of operators to coordinate with each other，Lifting platform - elevator - hydraulic lifting platform - elevator manufacturer and improving the reliability and safety of the system. The definition of safety zone is very important because the lifting stage has a large range of movements， and it must be accurately calculated. The lifting stage has two structurally separate systems， the ground turntable and the high-altitude work bar. However， for various movements on the vehicle， it is also an interconnected system， which needs to consider the priority of operation， system redundancy， and safety assurance of actions.
The working environment of the lifting platform.
iThe advantage of civil engineering for guide rail elevators is that there is no need for a machine room above the hoistway. The machine room can be installed at a height of meters or more on the top floor， and can be set within a radius of meters of the hoistway. Before starting， the cables and grounding wires should be checked and confirmed to be intact， and the switch should be in the zero position. After the power is turned on， the voltage should be checked and confirmed to be normal， and there should be no leakage during testing. It should be tested and confirmed that the electrical interlocking devices at each limit device， ladder cage， enclosure door， etc. are in good and reliable condition， and the electrical instruments are sensitive and effective. The safety airbag of the side curtain can prevent maintenance personnel from stepping into the gap between the platform and the sink during work. Preparation before use: Familiarize yourself with the correct usage process and correct usage process of hydraulic lifting platforms which are fundamental conditions for ensuring normal operation and extending service life of a hydraulic lifting platform. There are two main channels for understanding: first， the use and operation instructions provided by the manufacturer when the hydraulic lifting platform leaves the factory，Users need to read carefully; The second is the corresponding training on the use of the equipment after installation and debugging. Xilang Door Industry will arrange professional installation technical engineers to install the hydraulic lifting platform at the customers location. After installation is completed， the team of technical personnel will provide training on the operation process and safety precautions of the hydraulic lifting platform for the relevant users. At the same time， they will also explain some maintenance matters in the future; Carefully inspect the wear and tear of components. As it is a newly processed and assembled component of the hydraulic lifting platform， there may be subtle deviations in shape and size， which require normal operation and a period of running in. During the running in period， it is necessary to pay real-time attention to whether there is excessive wear and tear. If there is it is necessary to promptly contact the manufacturer of the hydraulic lifting platform， Xilang Door Industry， for professional treatment， to prevent in advance and avoid equipment failures; After a period of use， necessary lubrication work should be carried out. After a period of use， lubrication should be ensured between the pins and bearings of the hydraulic lifting platform to avoid wear and tear. Some engine oil or grease can be added appropriately to ensure that the product reaches its optimal operating state; Confirm several times whether there is any noise during the operation process. As it is during the running-in period， it is necessary to carefully observe during use. If any noise is found during the operation of the hydraulic lifting platform， there is no need to worry about it in the previous stage of use. Under normal circumstances， run multiple times， and after the running-in， the noise will naturally disappear. However， if there is noise for a long time and it does not disappear or weaken， it is necessary to contact the manufacturer in a timely manner， Solution processing; For long-term improvement the manufacturers products are complete， of excellent quality， and of favorable price. It is recommended to have a dedicated person regularly check the parts for looseness after running the hydraulic lifting platform for a cycle. Before use， nut， circlip， stopper， oil pipe joint， etc. for any signs of looseness. If any are found， they should be reinforced or replaced in a timely manner to avoid usage failures and accidents. After starting， a no-load lifting test should be conducted to measure the effectiveness of each transmission mechanism brake. Only after confirming that it is normal can the operation begin.
MCheck the fastening status of the wall bracket， support rod， they should be checked and tightened
SretailerThe working environment of the lifting platform.
rFWhen installing， disassembling， and adjusting the rotating mechanism， it is important to ensure that the centerline of the reducer of the rotating mechanism is parallel to the centerline of the gear， and its meshing surface is not less than %. The meshing clearance should be suitable for each box， distribution box， etc.， and should be kept clean regularly. Dust on electrical equipment should be cleaned in a timely manner. When encountering overheating in the electric motor， it is necessary to stop it in a timely manner and troubleshoot before continuing operation. The lubrication of the motor bearings should be good， and the hydraulic cargo elevator should provide us with safety protection. The application of hydraulic cargo elevators in our production is already very common， and they play an important role in our production， dirt， and other phenomena that slow down the production speed of the cargo elevator. After the speed of the cargo elevator slows down， first consider the factor of hydraulic oil flow. The factors that affect hydraulic oil flow include hydraulic pipelines， hydraulic valves， hydraulic oil pumps， electric motor speed control devices， etc. It is particularly important to note that the overflow valve of the cargo elevator cannot be adjusted on its own to avoid unnecessary losses.
Guide rail type cargo elevators should comply with the mechanical industry standards of the Peoples Republic of China. JB/TJB/T lifting platforms are generally divided into fixed lifting platforms， mobile lifting platforms， self-propelled lifting platforms， and lifting vehicles. The working environment temperature is --+ ℃， and the general requirement is that the lifting speed of the workbench should be -m/min， and there may be slight differences in calculation methods; Calculation of elevator speed: The lifting speed is equal to the lifting height/(volume of oil cylinder/displacement of pump station). During the use of lifting platform products， it is inevitable that some faults may occur. How can these faults be eliminated?
retaileryIf the warehouse cargo elevator needs to operate in a relatively special environment for a long time it should ensure that the external paint is regularly rewritten. Regarding the problem that has already occurred， which is that the paint has been falling off for a long time or the internal steel shows the appearance of rust， the first thing to do is to remove rust and then paint the exterior of the lifting platform from scratch. If the already aged rust is not removed and cleaned， applying new paint will not only have no effect， but also accelerate aging and reduce its service life. The maintenance secret of using a lifting stage that you dont know is that the lifting stage is an important operating equipment in modern factories， but how to maintain the lifting stage? Below， Jinan Ruilong will explain to you that the lifting stage is a large-scale electromechanical equipment with a high degree of automation. Scientific maintenance can greatly extend the service life of the lifting stage. As a precision modern transportation tool no matter how high-quality a product is， it is impossible for a freight elevator to never wear and tear. The key to the safe and reliable operation of a new cargo elevator that has been installed， debugged， comprehensive maintenance， and reasonable use of the cargo elevator by the user unit.Due to the characteristics of the work， normal wear and tear of equipment， aging of electrical appliances， and improper human use， the performance of the cargo elevator can be affected. Therefore， it can be said that; The cargo elevator is three percent in use and seven percent in maintenance;. The maintenance and upkeep of elevators and elevators is like a small car， which can promptly eliminate potential faults and ensure the safe use of freight elevators. The safety measures to prevent electric shock during production of the lifting stage are important equipment in modern high-altitude operations. We should pay attention to safety during operation. Lets learn about the safety measures of the lifting stage together.
FStrong load-bearing capacity， up to tons， can achieve multi-point， interactive interlocking between upper and lower floors achieving safe use; Large lifting height， using side mounted oil cylinders or dual measuring oil cylinders， ensuring smooth operation， no noise， easy maintenance， fast convenient， and practical; The depth of the pit is generally cm-cm， and the height of the top layer is not affected. It can be customized according to the on-site environment; The floor door can be connected， and the inside and outside of the factory can be poked open， both inside and outside can be used; The pump station adopts imported hydraulic pumps. If the speed requirement is too high， imported customized pump stations are used to achieve the ideal delivery requirements; The oil cylinder and sealing components adopt imported components to solve the problem of unstable oil pressure and oil leakage of components for customers; Electrical components can be selected from brands such as Delixi， Chint， Shanghai Peoples Electric， Schneider from France， and Siemens from Germany.
Manufacturer of lifting platform.
bQiananIts not scary if there is a minor malfunction in the elevator， but whats scary is knowing that there is a malfunction but not knowing how to solve it. Today Im here to help you troubleshoot it.
dSThe above is what we have introduced to you about the use of a lifting platform as a very important mechanical product for lifting，When applying， we need to pay more attention to the precautions that users need to pay attention to. So， lets introduce to you the precautions that high-altitude workers need to pay attention to.
Check and replace it immediately when its operation is unreliable. Attention: Before conducting maintenance and maintaining the electrical system of the work vehicle， the power supply must be cut off.
