+8613064022215
If there is a malfunction during the elevator， non electrical professionals are not allowed to disassemble and install electrical appliances at will to prevent accidental connection or electric shock.
1Regularly check the connection of each part and tighten it if there is any looseness. The tightness of the body connecting bolts should be checked when the body is under pressure (the rotating arm can be used to cause compression)， they must be promptly eliminated. Is there any jamming or appropriate tightness in the electric leveling insurance part. I have been engaged in the sales of various elevator manufacturers and other materials for many years， and operate with integrity. Welcome to call! Regularly check all wires and cables for damage. Timely bandage and replace damaged parts. When encountering overheating in the motor， and operation buttons can be set on each floor and lifting platform workbench to achieve multi-point.
Establish a storage system for oil. The incoming oil materials should be stored and stored exclusively according to their brand， and it is strictly prohibited to place them randomly. At the same time，Rail-type lift platform they should not be placed in the open air，ZhangjiakouFour wheel mobile scissor fork lifting platformWhat are the precautions for operation exposed to sunlight or rain， and should not be close to fire sources.
DShi QiutianThe specifications and models of the elevator platform are specially made according to the users requirements. The product has a sturdy structure， large load-bearing capacity， smooth lifting， simple and convenient installation and maintenance. It is an economical and practical ideal cargo conveying equipment for replacing elevators between low floors
GcThe oil leakage problem of hydraulic lifting platforms is a common problem encountered by customers who use lifting platforms
Regularly check whether the operation of each mechanism is normal and whether there is any noise. If any faults are found， they must be promptly eliminated.
During maintenance， remove the hydraulic oil tank filler cap， filter cap， inspection hole，Rail-type lift platform hydraulic oil pipe， and other parts. When exposing the system oil duct， avoid dust. The disassembled parts must be thoroughly cleaned before opening. When disassembling the hydraulic oil tank filler cap， first remove the soil around the tank cap. After loosening the tank cap， remove any remaining debris from the joint area (do not rinse with water to prevent water from seeping into the tank). Only after confirming cleanliness can the tank cap be opened. When using wiping materials and hammers， dried with high-pressure air， and then assembled. Choose a well packaged filter element (the inner packaging is damaged， although the filter element is intact， it may also be unclean). When changing the oil， clean the filter at the same time. Before installing the filter element，Rail-type lift platform use wiping materials to carefully clean the dirt at the bottom of the filter housing.
bIt should strive to achieve the same performance as the original brand.
TIn our daily lives， high-altitude work platforms play a very important industrial role. In order to better ensure the use of high-altitude work platforms，ZhangjiakouFour wheel mobile scissor fork lifting platformWhat are the precautions for operation we need to regularly maintain them. So， lets briefly teach you how to maintain high-altitude work platforms.
OManufacturing costEstablish a three filter system. When rotating or injecting oil into the barrel， three filters should be achieved， namely filtering during barrel rotation， and filtering during equipment refueling. And pay attention to the cleanliness of the oil barrel， oil injection port， etc.， and strictly prevent impurities from entering the oil port.
uCBefore daily work staff must carefully check the electrical，Lifting platform - elevator - hydraulic lifting platform - elevator manufacturer and mechanical systems of the hydraulic lifting cargo elevator for normality hydraulic， and test the hydraulic lifting platform with no load up and down several times to check for any faults or abnormal phenomena. They must also pay attention to the accuracy of the hydraulic lifting cargo elevator platform landing station for any significant abnormal differences. We are a long-term elevator manufacturer that welcomes inquiries
The staff should be responsible for supervising the distribution of goods transported by hydraulic elevators on the table as evenly as possible to prevent partial loading， and prohibit overloading. Hydraulic elevators are not allowed to carry people or transport flammable and hazardous materials， and are prohibited from climbing or shaking during lifting.
The occurrence of any accident is not accidental. Apart from manufacturing factors， human factors account for a large part， and we can also see this through the safety accidents of high-altitude work vehicles. The high-altitude lifting platform operating vehicle market is a complex high-tech product. How to make it safely serve social development is not only a concern for manufacturers， but also a concern for every unit and individual using hydraulic elevators. Users must carefully understand the performance of hydraulic platforms， strictly follow safety operating procedures， and always maintain safety awareness in their minds in order to truly use high-altitude work vehicles to reduce or prevent safety accidents. With the widespread use of hydraulic elevators by people， there are more and more requirements for their design. In order to meet the requirements of users， aluminum alloy hydraulic elevator designers need to consider numerous factors when designing hydraulic elevators. Below is a comprehensive explanation of the factors that hydraulic elevator designers need to consider.
RangeaFirstly， lets take a look at the characteristics of simple cargo elevators: simple cargo elevators are mainly composed of a hoist and a steel wire rope. The hoist is connected to the power supply and the cargo elevator is lifted up and down， achieving the lifting of goods. Generally， a three ton cargo elevator uses a ton hoist and a # steel wire rope， which exceed the actual load capacity very little. Once the hoist of the cargo elevator malfunctions， or stops operation， or loses control， the consequences of the steel wire rope breaking are even more unimaginable.
GThe impact of low temperature environment on steel， the materials of the main load-bearing components at low temperatures must not only meet the requirements of strength， but also meet the requirements of impact toughness. The welding structure of low-temperature load-bearing components has a significant impact on welding thermal stress， stress concentration， etc. Therefore， suitable structural forms should be selected for elevators at low temperatures.
Poor quality hydraulic oil is as transparent as good hydraulic oil at room temperature， and once used or with temperature changes， it will appear black， white wax， and solid blocks will also appear.
jHeidelberg Oil leakage from the lifting platform: loose joints; The sealing ring is damaged. The elimination is to replace the shear fork at the joint where the oil leakage is tightened.
bYEvery customer who purchases will pay attention to the price of the elevator， so how does the manufacturer calculate the price of the elevator? In general， the manufacturer calculates the price of the elevator for customers based on the actual size， lifting height and carrying capacity of the on-site reserved opening provided by the customer Customers do not need to pay too much attention to the price difference between different elevator manufacturers when purchasing elevators， the material brand is different as the materials used are different， and the production process is differentThis has resulted in different prices for cargo elevators Customers can consider the cost-effectiveness of elevators more when purchasing， with the principle of getting what they pay for. Safety hazard elimination plan for lifting cargo elevators: When there is a malfunction or abnormal situation in the lifting cargo elevator， it should be immediately stopped from use. After eliminating the malfunction and accident hazards， it can be put back into use
Before daily work， staff must carefully check the electrical， hydraulic， and mechanical systems of the hydraulic lifting cargo elevator for normality， and test the hydraulic lifting platform with no load up and down several times to check for any faults or abnormal phenomena. They must also pay attention to the accuracy of the hydraulic lifting cargo elevator platform landing station for any significant abnormal differences. We are a long-term elevator manufacturer that welcomes inquiries
